Hi all,
 I´m new in TechNet and I thanks in advance with any help you could  

give me. I´m from Brazil, so I apologize about my english writing.
 Well, my manufacture department is complaining with me that the PADs  

I´m using is too small for a PQFP240 pins.
 I used to have this dimensions:

PAD   50x10 mils
SOLDER MASK 50x10 mils
PASTE MASK   48x8 mils

 And they are asking me to use this:

PAD   96x10 mils
SOLDER MASK 96x10 mils
PASTE MASK   94x8 mils

 I would like to know which pad size you are using, as well as some  

experience you have with fine-pitch pads.
 We are using REFLOW process and Stencil with thickness 0.15mm
 Thank you all,
_______________________________________________
             Roberto Alves Nunes
     Promon Eletrônica da Amazônia Ltda
  Av. Selma Parada, 201 - Fazenda São Quirino
      Galleria Office Park - Edifício III
         CEP:13091-901 - Campinas - SP
CGC: 84.534.254/0002-60 - I.E.: 244.615.216.110
  Fax:+55(019)707-3969 Phone:+55(019)707-3841
      mailto:[log in to unmask]