TECHNET Archives

April 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Stephen R. Gregory" <[log in to unmask]>
Reply To:
Date:
Fri, 9 Apr 1999 13:52:03 EDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (55 lines)
In a message dated 4/8/99 11:41:46 AM Pacific Daylight Time,
[log in to unmask] writes:

<< Steve,
        You might want to check out a little 'ornamental' shop in
 Fremont I have used in the past. Its called American Machining/Tooling
 (kinda ironic name), and Charlie Lee is the owner. Tell him Mike from
 Mitek (my previous life) says hi. He has a real down n' dirty little
 sweatshop, but Sorectron buys a lot from him so you know it's good and
 cheap. He can work from ideas and cocktail napkins, so you've got a
 chance....

 Mike McMonagle
 PCA Process Engineering Supervisor
 K*Tec Electronics
 1111 Gillingham Lane
 Sugar Land, TX  77478
 (281) 243-5639 Phone
 (281) 243-5539 Fax
 [log in to unmask] >>

Hi Mike!!

    I just want to give you a big thanks for turning me on to American
Tooling and Machining!! Charlie Lee says "Hi!" as well! He remembers you...

    What a heck of a neat guy, you wasn't wrong about him being able to work
off a cocktail napkin and understanding a concept...he knows his stuff. He's
been there and done that in a lot of areas. Told me he's done something
similar for Sun MicroSystems. Understood perfectly about the importance of
even airflow around the pins of the PC104 connector. Even pointed out
something to me that I didn't think of. I was envisioning an enclosure just a
little bigger than the footprint of the connector, but he pointed out;
"Steve, wider is better...make the enclosure wider so you will avoid dead
spots inside, and we need to make sure we vent things correctly so the air
flows smoothly all around..." He's gonna start working on it tommorrow and
try to have something for me next week.

     You couldn't have recommended a better shop! Thanks again! I owe you a
cool one, or two, or three...(GRIN)

-Steve Gregory-

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2