Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 9 Apr 1999 09:38:40 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You might try Robotic Process Systems (RPS) for an automated solution. Below
is a link to their site on the web.
http://www.rpsautomation.com
Sincerely,
Brian Stumm
>Dear Technetters,
> I have a double side surface mount board with an edge connector.
>The connector slides on the edge and has leads on both sides on the
>board at a pitch of 0.05". There are about 30 leads on each side of the
>board. We are planning to attach this as one of the final assembly
>processes but how. Can we use a mini wave solder pot to create the
>solder joints or should we order a custom solder tip (0.05" x 1.68") so
>we can heat up all the leads on one side at one time and then feed in
>wire solder as needed?
>
>Any and all ideas would be appreciated. If anyone knows of an automated
>or semi-automated 'hot bar' solder method, we are interested.
>
>Thanks in advance for your assistance.
>
>Wade Oberle
>[log in to unmask]
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|