David,

If you have a Gerber Editor, like CAM350, you should be able to export the
gerber of each layer in DXF format.  I have not done this but, this is the
way I would try doing it.  You have to have the DXF export feature.

Greg Kaskey

> -----Original Message-----
> From: David Baldwin [SMTP:[log in to unmask]]
> Sent: Wednesday, April 28, 1999 11:35 AM
> To:   [log in to unmask]
> Subject:      [DC] Need Help Producing DXF Files
>
> DC Members:
>
> My customer is requesting that I provide him with .DXF files of all film
> layers.  PADS
> DXF export utility doesn't quite do it.  I've e-mailed PADS tech support
> but I don't
> expect a promising answer.
>
> Is there another way to give my customer .DXF files of all film layers
> from gerbers or
> HPGL plots?  Any help or suggestions are appreciated.
>
> Thanks,
>
> David Baldwin
> __________________________________
>    PCB Designs by Baldwin Tech
> (480) 539-4400  FAX (480) 539-4500
>    <http://www.baldwin-tech.com/>
> __________________________________

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################