Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 30 Apr 1999 07:47:28 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
It would depend on what needs to be changed. Generally, to change
tooling at the board house is about $450, and the same for a change to
the electrical test fixture. As far as rev changes go, just ensure you
are following your procedures as per IPC. I generally have the board
revved by the customer if there is a change to the board itself.
> -----Original Message-----
> From: [log in to unmask] [SMTP:[log in to unmask]]
> Sent: Friday, April 30, 1999 7:43 AM
> To: [log in to unmask]
> Subject: [TN] Revision change costs
>
> I am interested to find out how much it cost to change a revision
> on a
> PCB. Here is the situation: A PCB is in use on a product
> already in
> production. Say an item on the fab drawing needs to be changed -
> one
> that does not affect form, fit, function. Some here believe that
> any
> drawing that has left the building needs a rev change. I'd heard
> once
> in a seminar that to change artwork on a board in production
> could
> cost from 25K - 250K. Is this so?
> Any input is appreciated.
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|