I used current density 15mA/cm**2 in our Macdermid tin-lead bath for 5
min. and I got 110 uin. with a 67% tin. But when I change the current
densities to 7.5mA/cm**2, I got 140 uin. with a 75% of tinfor 10 min..
My question is will a change in current densities in a Macdermid
tin-lead bath screw up the composition of Tin and Lead?
My e-mail : [log in to unmask]
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################