Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 31 Mar 1999 08:28:39 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
>-----Original Message-----
>From: Kittel, H. James @ SLC
>Sent: Wednesday, March 31, 1999 8:18 AM
>To: [log in to unmask]
>Subject: RE: [TN] Ni/Au "black pad" problem
>
>Paul,
>
>The 'removal' profile peaks at 220 deg C with profile repeat data varying +/-
>2 deg C.
>
>Absolute pad/ball temperatures are more difficult to measure because they are
>so dependant on the technique of attaching thermocouples and size of the
>thermocouples used. There can also be a 10 degree temperature gradient
>across the BGA. I feel certain I am within 10 degrees C of 220 deg maximum
>and probably within 5 degrees.
>
>Jim Kittel
>
>-----Original Message-----
>From: [log in to unmask] [SMTP:[log in to unmask]]
>Sent: Wednesday, March 31, 1999 7:26 AM
>To: Kittel, H. James @ SLC; 'TechNet E-Mail Forum.'
>Subject: RE: [TN] Ni/Au "black pad" problem
>
>Jim Kittel,
>
>What is the temperature setting and temperature variations of your
>Airvac hot nitrogen gas system?
>
> Paul Wilson
> Plant Chemist / R&D Manager
> Circuit Center, Inc.
> 4738 Gateway Circle
> Dayton, OH 45440
>
> Phone (937) 435-2131 Fax (937) 435-7698
> http://www.circuitcenter.com
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|