Ken ,
Try to define better the magic word DI . The " real " DI , 18 Mohm , is very
corrosive and apart of it , contamination is very rapid . I do belive , that
you are using less " clean " DI water , maybe 1 Mohm or even several
microsiemens . I also presumen , that your system includes recirculated
water , it means , this is not really DI water . If my assumption are
correct , ss-316 heater . For this small ammounts even teflon coated heater
should be enough ( 80 liter per hour , will make 1.5 KW heater ) .should be
enough for your purposes .
regards
At 14:37 23/03/99 -0800, you wrote:
>This is a little off subject except we use hot DI for board cleaning.
>
>We are looking for a small, fast recovery DI water heater. It needs to keep
>about 20 gallons per hour usage at least 140F to 160F. Everything we've
>seen is very expensive, espically when we say the magic word, DI.
>
>Any leads would be greatly appreciated.
>
>
>Ken Bloomquist
>Sr. Principal Process Engineer
>PRIMEX Aerospace Company
>P.O. Box 97009
>Redmond, WA 98073-9709
>http://www.primextech.com
>
>Ph: 425-885-5000
>FAX: 425-882-5786
>[log in to unmask]
>
>Northcon/99, Board Member
>http://www.northcon.org
>
>Electronics Manufacturers Association (EMA), Vice President
>http://www.ema-wa.org
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>
>
Edward Szpruch
Eltek Ltd - Israel Tel : 972 - 3 - 9305050 , Fax : 972 - 3 - 9309581
Sgoola industrial Zone , POB 159 , 49101 Petah Tikva , Israel
e-mail : [log in to unmask]
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
