TECHNET Archives

March 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Felix Lane <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 19 Mar 1999 08:49:36 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (26 lines)
Gary,
     About 2 years ago, I had a product which had greater than 1000
components (0603) on the underside.
     No issue

     The underside was printed using a 0.010" stencil and Locitite 3607.
     The aperture size was an oblong shape , 0.030" long x 0.015" wide.
     A minimum of 0.010" gap between the aperture and pad, both sides.
     The 0603 pad was 0.043" x 0.026".

     Hopes this helps you

     Felix

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2