TECHNET Archives

March 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Corey A Peterson <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 11 Mar 1999 17:06:59 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (74 lines)
Tim,

I was wondering exactly what capability were you going to be looking at?
Placement accuracy capability such as X, Y and theta , Part type capability
such as :1206 parts place fine but say 0805 have a slight skew in them and
still other have other amounts of variation.   The reason that I ask is
because I've been wondering exactly how much package type effects
capability and process replication between facilities with different
equipment. I should take some time to look at this but until I'm more sure
that this is good time spend I'll wait.


Best Regards

CP




"Stammely, Tim" <[log in to unmask]> on 03/11/99 04:34:39 PM

Please respond to "TechNet E-Mail Forum." <[log in to unmask]>; Please respond
      to "Stammely, Tim" <[log in to unmask]>

To:   [log in to unmask]
cc:    (bcc: Corey A Peterson/Mequon/RA/Rockwell)
Subject:  [TN] Process capability of surface mount machine




Hello all,

I'm planning a process capability study to benchmark the performance of my
Zevatech 740 P&P and was wondering if either 1)anyone out there has done
this on a Zevatech manchine and has suggestions or if 2) anyone can suggest
what type of materials to use (i.e. glass substrates, special parts and/or
kits, etc.) This will be the first time I've done a process capability
study
on a surface mount machine and was just looking for some advice.

Thanks

Tim Stammely
Mfg. Process Engineer
MSI
Manassas, VA

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2