TECHNET Archives

March 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Surface Insulation Resistance (2nd Request)
From:
Bob Felton <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 1 Mar 1999 10:42:03 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines) 
What range of SIR can be reasonably expected on PWBs made from epoxy
glass and polyimide glass materials?  Bare board and post assembly.
Assembly is manual using both through-hole and SMT parts, using rosin
flux.  Cleaning is done either in a vapor degreaser (using an n-propyl

bromide solvent) or by cold washing in isopropyl alcohol.  Thanks.

--
Bob Felton
[Micro Instrument Co., Escondido, CA]
([log in to unmask])

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2