Currently, I am using Ciba Epibond 7275, and HASL and
immersion gold finishes. It works better than Lotite SMT glues I
tried. Solder mask is also from Ciba, I think it is Probimer 52
>>> Wade Oberle <[log in to unmask]> March 17,
1999 9:46 am >>>
Matthew,
What type of adhesive are you using and what is the finish
on
your boards? Also, what type of solder mask are you using?
Thanks in advance.
Wade
-----Original Message-----
From: Matthew Park [SMTP:[log in to unmask]]
Sent: Wednesday, March 17, 1999 11:33 AM
To: [log in to unmask]
Subject: Re: [TN] Smt process
Your process is backward. We run and cure gluing first and
flip
the process over, and print & pick/place and reflow. Didn't
have
any problem so far with cured glue and losing cured
components.
Matthew Park
Norsat International Inc.
>>> <[log in to unmask]> March 17, 1999 8:24 am
>>>
We are in the process of determining the most efficient way
to
run our smt
process. Right now we only have a half line and are looking
at
adding the
back half of the line. Our current process takes us through
reflow first,
flip the product, then move the product to the beginning of
the
line and
then run the bottom side (curing). If we use this current
process
with the
second half of the line, we will need to flip the product over
before it
reaches the hand insertion line. Our thoughts are can we
run
bottom
(curing) first, flip the product, and then run top side
(reflow)?
This
will require us to only flip the product once. Are there any
issues
with
running curing first and then running reflow? After the glue
is
cured, it
will be passing through the oven during reflow at a higher
temperature than
the curing temperature. Will the reflow temperature have
any
effect on the
glue?
Rob Williams
################################################################
TechNet E-Mail Forum provided as a free service by IPC
using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to
[log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line
Services" section for additional information.
For technical support contact Hugo Scaramuzza at
[log in to unmask] or 847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC
using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to
[log in to unmask]
with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line
Services" section for additional information.
For technical support contact Hugo Scaramuzza at
[log in to unmask]
or 847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to
[log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line
Services" section for additional information.
For technical support contact Hugo Scaramuzza at
[log in to unmask] or 847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|