TECHNET Archives

February 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Dave Hoover <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 17 Feb 1999 15:11:38 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines)
Hole Chart would be advisable for on drawings. Drill Chart suggests what
size to be
drilled. A hole chart suggests what you want on the finished product.
Each fabricator
may use a slightly different drilled hole size to achieve the finished
hole size.

Just thoughts....

Groovy

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2