This is a bit unusual, most people have racks the pallets sit in and cool
down before they reuse them. Hopefully you not having a problem with them
being to hot to take of the solder machine. If so, I agree with the response
that you should check your material and make sure it's a good insulative
composite. If it's a matter of just wanting to cool them down before you
reuse them, I do know of an outfit that makes holding racks with fans that
blow across the carriers. This cools them down in a matter of minutes. Give
me a buzz and I'll get you more details.
Jim Gleason
972-494-1911
-----Original Message-----
From: Ruben Irizarry <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Tuesday, February 02, 1999 7:11 AM
Subject: [TN] Wave Solder Carriers Cooling system


>I am currently using wave soldering carriers for some of my modules at wave
>solder. We need to use them in order to protect the contact gold fingers.
>We are currently using conductive cooling system by submerging them in
>water but anyhow at the moment of using them they are still hot and wet. Is
>there any possibility of using convective methods and some kind of rolling
>conveyors or something?
>
>Please help me out
>
>Ruben
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################