Hi:

Just my curiosity, Which system would you recommend for selective solder
stripping using Dry film as mask?
When people perfer reflowed electrolytic Solder instead of  HASL, becasue of
evenness and solderability concerns.

Thanks and Good day!
-----Original Message-----
From: <Rudy Sedlak> <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Monday, February 15, 1999 10:06 AM
Subject: Re: [TN] Tin Stripping; Immersion Tin


>Oh, yeah, about stripping immersion Tin.
>
>You can strip immersion Tin the same way you strip plated Tin, and there
are
>two basic systems in use, a Nitric/Ferric based system, and a
>Peroxide/Bifluoride based system.
>
>The Peroxide Bifluoride based system is "cleaner", in that all the Tin
>actually goes into solution, however it is heavily chelated.
>
>The Nitric/Ferric system is slower, and the Tin goes into true solution
only
>when it is fresh, it then is dispersed as the oxide in the solution.  This
>system is sometimes chelated, depending on your vendor.
>
>The Peroxide Biflouride system inherently does not attack the Copper to a
>great extent. The Nitric/Ferric system attacks Copper a lot, but usually
>contains anti-tarnish type ingredients to minimize that.
>
>If either system were left on the board permenantly, the
Peroxide/Biflouride
>system probably has less tendency to continue attack.
>
>Rudy Sedlak
>RD Chemical Company
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################