TECHNET Archives

February 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
BOB HAYNES <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 10 Feb 1999 15:57:18 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (57 lines)
Date sent:              Wed, 10 Feb 1999 14:28:41 -0600
Send reply to:          "TechNet E-Mail Forum." <[log in to unmask]>,
                Jerry Hoppke <[log in to unmask]>
From:                   Jerry Hoppke <[log in to unmask]>
Subject:                [TN] component designators
Originally to:          [log in to unmask], [log in to unmask], [log in to unmask]
To:                     [log in to unmask]
Jerry,

I believe this is done by JEDEC Solid State Technology
Association which is a body of Electronics Industries Alliance (EIA)
you can find them on the web http//:www.jedec.org/.

Bob Haynes

> Hi Techies,
>
> Here is a question for some of you guys with component backgrounds.
> What organization comes up with the call outs for electronic
> components?  Like INXXXX, for leaded diodes, 2NXXXX FOR transistors,
> DL-XX MELF for SMT diodes, etc.  And where would one find a listing of
> correct call out for various components?  When I was at Honeywell, we had
> at component group that made sure this was all done correctly, now I see
> prints with call outs for both leaded and SMT on the same print.  I know
> they are wrong but cannot give a reference to correct procedure.
>
> This is abit of the beaten path for most of us, but I am sure someone has
> that that bit of knowledge tucked away somewhere in this group.
>
> Thanks,
> Jerry Hoppke
> Datakey
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################ To
> subscribe/unsubscribe, send a message to [log in to unmask] with following
> text in the body: To subscribe:   SUBSCRIBE TechNet <your full name> To
> unsubscribe:   SIGNOFF TechNet
> ################################################################ Please
> visit IPC's web site (http://www.ipc.org) "On-Line Services" section for
> additional information. For technical support contact Hugo Scaramuzza at
> [log in to unmask] or 847-509-9700 ext.312
> ################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2