Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 25 Feb 1999 16:58:04 +0000 |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
On this subject, I have recently been investigating an open circuit problem
with a multilayer board and have found a small, but significant, level of foil
cracking at the hole / inner layer interface with no apparent reason. There are
no unused pads and I had already been pondering whether the lack of these
"dummy" pads could result in more stress on the inner layer junctions during
thermal shock - 288 C for 10 seconds. Maybe any weaknesses in the junction are
more likely to result in fracture if there are no dummy pads ?
Comments, anybody.
Bryan
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|