I believe it's IEEE that you are looking for. Doesn't JEDEC register
packages? For instance
2NXXX can be registered with JEDEC in multitudes of package form factors;
e.g. TO-3, TO-5, TO-99, TO-254, etc.
-----Original Message-----
From: BOB HAYNES [mailto:[log in to unmask]]
Sent: Wednesday, February 10, 1999 12:57 PM
To: [log in to unmask]
Subject: Re: [TN] component designators
Date sent: Wed, 10 Feb 1999 14:28:41 -0600
Send reply to: "TechNet E-Mail Forum." <[log in to unmask]>,
Jerry Hoppke <[log in to unmask]>
From: Jerry Hoppke <[log in to unmask]>
Subject: [TN] component designators
Originally to: [log in to unmask], [log in to unmask],
[log in to unmask]
To: [log in to unmask]
Jerry,
I believe this is done by JEDEC Solid State Technology
Association which is a body of Electronics Industries Alliance (EIA)
you can find them on the web http//:www.jedec.org/.
Bob Haynes
> Hi Techies,
>
> Here is a question for some of you guys with component backgrounds.
> What organization comes up with the call outs for electronic
> components? Like INXXXX, for leaded diodes, 2NXXXX FOR transistors,
> DL-XX MELF for SMT diodes, etc. And where would one find a listing of
> correct call out for various components? When I was at Honeywell, we had
> at component group that made sure this was all done correctly, now I see
> prints with call outs for both leaded and SMT on the same print. I know
> they are wrong but cannot give a reference to correct procedure.
>
> This is abit of the beaten path for most of us, but I am sure someone has
> that that bit of knowledge tucked away somewhere in this group.
>
> Thanks,
> Jerry Hoppke
> Datakey
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################ To
> subscribe/unsubscribe, send a message to [log in to unmask] with following
> text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To
> unsubscribe: SIGNOFF TechNet
> ################################################################ Please
> visit IPC's web site (http://www.ipc.org) "On-Line Services" section for
> additional information. For technical support contact Hugo Scaramuzza at
> [log in to unmask] or 847-509-9700 ext.312
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|