Sender: |
|
X-To: |
|
Date: |
Sun, 7 Feb 1999 21:41:40 -0800 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset=us-ascii |
Organization: |
Ramp Labs |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Hamilton, Richard -4454 wrote:
>
> Hello all,
>
> I wanted to get a 'heads up' on a possible problem so I asked this several
> months ago and got no reply. I thought, Great! This is not a problem!!
>
> Well, not so sure now. The peelable masking we are using on our PWB's seems
> to be getting tougher to remove after reflow process has been added to the
> system.
>
> Anyone have any suggestions, guidelines, or other input on what to look for
> or what to look out for? We will have to start looking at other vendors for
> the masking. Sorry but I cannot tell you the mfgr right now, our PWB
> designer is out today. If this information is needed, let me know and when I
> get it I will let you know.
>
> Thanks gang.
>
> Richard Hamilton
> Clemar Mfg. / Rain Bird
> [log in to unmask]
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
> ################################################################
=======================================
Richard:
There is a water soluble Solder mask that will protect surfaces against
solder contamination and is washed off during wash cycle. If you are
washing your boards, then it is a very effective process. It was used
very successfully when I was at IBM.
Let me know of your application and process parameters and I can send
you small sample of the material for a trial.
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|