TECHNET Archives

January 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Hull Cell Stress Analysis
From:
"<Rudy Sedlak>" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 25 Jan 1999 21:22:46 EST
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines) 
The 66 asf is for a 1 amp pushed to the cell, if my memory is correct.

Use 3 amps and multiply all the ruler readings by 3, so 66 asf becomes 198
asf, which in my world is close enough.

You plating PCB's at 200+ ASF?   Phew, not bad.   You have aspect ratios in
the holes of 1:1?

Rudy Sedlak
RD Chemical Company

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2