TECHNET Archives

January 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Jim Kittel <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 25 Jan 1999 10:02:07 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (56 lines)
I just went thru that myself and here are my thoughts.

An ionograph is OK for process control, if you use a high sensitivity
one built for SMT cards.

For process development, I actually removed a BGA and visually inspected
it for flux residues.  You could either use a clean BGA rework station,
or a screwdriver.  Prying the BGA off also gives some insight into the
solder connections. You can see wetting, voids, blowholes, solder dam
conditions, etc. (One could also measure the CCA and the removed BGA in
the ionograph, as a more sensitive test.)

Jim Kittel

>-----Original Message-----
>From:  John Chandler [SMTP:[log in to unmask]]
>Sent:  Sunday, January 24, 1999 11:46 PM
>To:    [log in to unmask]
>Subject:       [TN] BGA clean checking
>
>As you all know. We are getting into doing a basic BGA assembly. The new
>question which came up is, since we run a water soluble flux paste. How are
>we going to know if it is clean under the BGA??  Any suggestions beside
>going to a no clean paste??
>
>Thanks  in advance.
>
>John
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
>for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
>847-509-9700 ext.312
>################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2