Sender: |
|
X-To: |
|
Date: |
Wed, 6 Jan 1999 09:02:22 -0600 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
I've had that experience due to moisture in the pcb. As it went over the
wave it outgassed through vias and plated through hole ( cracking the
walls). We cleared it up initially by baking the boards then addressed the
problem with our bare board vendor.
Jim Gleason
-----Original Message-----
From: annie laberge <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Wednesday, January 06, 1999 8:55 AM
Subject: [TN] pinholes
>Good morning everyone
>
>On some of our products, we have pinholes in Through holes solder joints.
>We have no idea what is the root cause of these pinholes.
>Could the root cause come from the PCB ? And if so, what default in the PCB
>could cause this ?
>
>These products are 8 layers PCB, with 4 ground planes which 2 of them are
>on outer layers, and 0.093" thick, and the hole diameter is 0.023".
>
>With these products, we had lots of problems.
>Fist we had missing solder because of the lack of heat caused by the heat
>disssipation of the ground planes.
>We optimised our wave parameters to minimize the problem.
>Then we had blow holes. The root cause was humidity in the board. We
>don't have this problem anymore.
>
>Any help would be greatly appreciated, thanks in advance.
>
>A. Laberge
>Quality Eng.
>Matrox
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|