Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 21 Jan 1999 06:55:35 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Ken,
What type of oven do you have and how many zones do you have?
It may also be helpful to list the zome temperture settings for the rest
of us to comment. Is this a panelized board with various routed areas
or does it have various cut-outs in it?
Wade Oberle
[log in to unmask]
-----Original Message-----
From: Ken Nevius [SMTP:[log in to unmask]]
Sent: Tuesday, January 19, 1999 3:33 PM
To: [log in to unmask]
Subject: [TN] Bowed Boards
We have been seeing boards come off our reflow oven with bow
and twist
that exceeds IPC specs. Our vendor insists that we are the
only
customer that complains about this. We had our reflow oven
calibrated
and it looked fine. The only thing about the profile that
may be
suspect is the cooling rate may be a little too fast.
According to the
vendor, they put all of their boards through a de-warping
process.
The vendor has tweaked their de-warping process to cool
slower in an
effort to make the problem go away.
My question is: This is our first bout with warping, what
should we be
looking at for a cause? Is it normal for a pc board vendor
to have to
de-warp boards?
Regards,
Ken Nevius
Veeder-Root
Altoona, Pennsylvania
################################################################
TechNet E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask]
with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line
Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask]
or 847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|