Here's a few useful equations that I derived in one of my papers for
Flexcon a few years back.
Location of Neutral Axis (in) = Sum (Area of Layer x Modulus of Layer x
Distance of Layer from Origin) / Sum (Area of Layer x Modulus of Layer)
Composite Moment of Inertia (in^4) = Sum (((Width of Layer x (Modulus of
Layer / Modulus of Stiffest Layer) x Thickness of Layer ^ 3) / 12) +
(Width of Layer x (Modulus of Layer / Modulus of Stiffest Layer) x
Thickness of Layer x Distance of Layer from Neutral Axis ^ 2))
Composite Thermal Strain (in/in) = Change in Temp. x Sum (Layer Modulus
x Area of Layer x CTE of Layer) / Sum (Layer Modulus x Area of Layer)
Thermal Bending Moment (in-lb) = Sum (Layer Modulus x Area of Layer x (
Composite Thermal Strain - (Change in Temp. x CTE of Layer) ) x Distance
of Layer from Neutral Axis)
Thermal Bend Radius (in) = (Modulus of Stiffest Layer x Composite Moment
of Inertia) / Thermal Bending Moment
These equations are implemented in software posted at:
http://www.geocities.com/CapeCanaveral/Launchpad/9641/program/program.html
Andy Magee
Flex Guru - Consulting
[log in to unmask]
(937) 435-3629
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################