If a microetch is used to clean panels prior to oxide, the second pass
removes more rather than less copper. I would be very careful about multiple
passes through the oxide if microetch is present.

Dave Rooke
Viasystems Canada

-----Original Message-----
From: Scott B. Westheimer <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Wednesday, December 16, 1998 10:21 PM
Subject: [TN] Oxide rework


>Fellow Colleagues,
>
>Wondering if someone can tell me the industries stand on reworking inner
>layers at black oxide. Would like to get the point of view from both the
>PCB manufacturer and end user. I realize that controls need to be in
>place so that the layers are not over etched and signal lines are not
>reduced, especially for controlled impedance layers. The first time the
>boards were oxided they had 40u' of copper etched away and I believe
>that by reworking and removing 20-30u' this should not effect the
>functionality of the boards.
>
>You comments would be greatly appreciated.
>
>Scott Westhimer
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################