TECHNET Archives

December 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Problem with IC Sockets
From:
Jim Hedderick <[log in to unmask]>
Reply To:
Jim Hedderick <[log in to unmask]>
Date:
Tue, 15 Dec 1998 16:25:11 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (28 lines) 
To All:
We have got a problem with a 56 way IC socket ,when we assemble the
pbc with the socket in place we are getting solder bridging up the IC
socket legs we use dia 1.00mm holes for mounting this socket i would
think by reducing the mounting hole dia to 0.6mm this would solve the
problem has any one solved this problem in some other way
We where going to try to use an alternative IC socket of the turn pin
type but have no information on the reliability of this type of
socket.
Does any one know of alternative solutions to this problem or where I
can get some more information on this turn pin type of socket and its
reliability.

kind regards
Jim Hedderick

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2