Hi Rick

We've got a fellow here in pro.eng. who's a real process nut ;
and he's got systems galore in his head ; tried & tested .

His name is Zoran Raich ; pop him a line; he may stretch his time and
mail you some his spreadsheets ;
with a bit of luck

see you

Paul Klasek
http://www.resmed.com

> ----------
> From:         Rick Thompson[SMTP:[log in to unmask]]
> Sent:         Saturday, 12 December 1998 5:08
> To:   [log in to unmask]
> Subject:      [TN] Part Numbering Systems
>
> Hi,
>
> We're currently looking at implementing our own internal part
> numbering
> system after several years of using our customers individual systems
> (we're
> a contract manufacturer).
>
> I'm looking for any ideas, suggestions or sources of information on
> part
> numbering systems in general as well as any implemented particularly
> in our
> industry that might help in cross referencing customer part numbers to
> the
> internal numbers.
>
> Any help would be greatly appreciated.
>
> Thanks in advance.
>
>
>       Rick Thompson
>         Ventura Electronics Assembly
>         2665A Park Center Dr.
>         Simi Valley, CA 93065
>
>       [log in to unmask]
>
>         (805) 584-9858 voice
>         (805) 584-1529 fax
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################