Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 4 Dec 1998 03:13:15 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hugh Scott Miller wrote:
>
> Happy Holidays Technetters,
>
> A recent project has entered our shop from a customer that is demanding
> that all finished hole tolerances be held to +/- .001". I pose the
> following questions to the esteemed Technet panel:
>
> a. Are hole tolerances of +/- .001" realistic?
My suggestion - question the drawing or at least
be certain you are reading it correctly.
Long ago, a company was (unbeknownst to me) testing
us with a tricky mechanical print. If one didn't
understand GD&T (I didn't), one would think that a
particular slot had a +/-.001" positional tolerance
(I did).
In a GD&T dimensioning scheme, you could be looking
at a note that is telling you the tolerance for the
holes relative to the global tolerance, but it looks
absolute.
Many thanks to John Sabo's presentation on Geometric
Dimensioning and Tolerancing for opening my eyes on
the topic, and giving me a belly laugh when I real-
ized what had been happening 7 years earlier.
Regards to all,
--
Jeff Seeger Applied CAD Knowledge Inc
Chief Dimensionally-Challenged Electronics Guy Tyngsboro, MA
jseeger "at" appliedcad "dot" com 978 649 9800
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|