Subject: | |
From: | |
Reply To: | DesignerCouncil E-Mail Forum. |
Date: | Wed, 16 Dec 1998 13:18:00 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Lou -
In my book, that looks like a trace with a cross section somewhere around .025
square inches. While it may be possible to design such a beast, I would be
very concerned whether one could successfully load and solder the board
without destroying it in the process.
I have, in the past, had fairly good success with some of the laminated bus
bars offered by several of the specialty shops. These can be had for either
solder-on or bolt-on applications. Custom designs are relatively inexpensive.
Regards - Kelly
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|