Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 4 Dec 1998 09:31:57 EST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Bob -
From my perspective, equipment to varying degrees is application specific - in
its setup, features, and process monitoring. So, what kind of product do you
plan to pass through?
For example, from my experience, if you plan to solder SMCs, either by
themselves (you should reflow here) or along with through-hole leads, I would
strongly recommend a dual-wave system with a spray fluxer, at the very least.
Regards,
Phil Zarrow
ITM, Inc.
Durham, NH
www.ITM-SMT.com
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|