Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 3 Dec 1998 10:19:02 +1100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Phil ( & the rest of you folks)
If you could help me back in return :
After ages doing all the separations possible ; I found :
The V groves unreliable in depth ; good enough for less complex work
Also ; the breaking of more complex boards is stressful ;
we've had some examples here of pads too close to pizza blades ;
and the "designer" shapes out of equation anyhow .
So we shear tabs now with a single hook blade ; struggling with time
The volume folks of depaneling odd shapes ( L ) ;
would you use a grid plates with shear ( supports & blades )
configuration reflecting the tab positions ;
or what is the single action tool ? ; that is for routed panel with tabs
.
Thanks a lot
Paul Klasek
http://www.resmed.com
> ----------
> From: [log in to unmask][SMTP:[log in to unmask]]
> Sent: Wednesday, 2 December 1998 0:37
> To: [log in to unmask]
> Subject: [TN] Router survey
>
> Hi again, Technetters -
> The router survey is going well - thanks to those who have responded
> and are
> responded. Of course, just about everyone that has responded so far
> are using
> some means of post-assembly routing. I'd also very much like to hear
> from
> those who are pre-scoring (pre-assembly) and manually breaking the
> boards away
> after assembly.
> Thanks much.
> Phil Zarrow
> ITM, Inc.
> Durham, NH
> www.ITM-SMT.com
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|