Mime-Version: |
1.0 |
Sender: |
|
X-To: |
|
Date: |
Tue, 15 Dec 1998 13:35:57 -0600 |
Reply-To: |
|
Subject: |
|
From: |
|
In-Reply-To: |
|
Content-Type: |
text/plain; charset="us-ascii" |
Parts/Attachments: |
|
|
Others from the PCAD User group have the serial key working
under NT. You may need to install a patch for your key.
This should work for either serial or parallel.
Note: You will NOT have screen resolution greater than 640x480. There is no
driver available for higher resolution.
______________________________________________________
.. here is the procedure
it works with Win NT 4.0 with a service pack 2 or greater.
- Go on http://www.rnbo.com/tech/drivers/index.html
- download "rainport 2.0"
- save the file to your disk (rainport.exe)
- run rainport to unzip it, for example in c:\rainbow
- run c:\rainbow\install.bat
- a dialog box asks you for the path
- change the path from A:\i386 to C:\rainbow\i386
- a dialog box tells you that the installation is complete
- a dialog box asks you to reboot
- reboot
Hope this helps....
Neil Diamond
***********************************************************
At 01:49 PM 12/15/98 -0500, Ron James wrote:
> Greetings to the list,
>
> I am switching from Windows 95 to NT, and I am trying to get PCAD
> Master Designer to work on the new machine. The Accel web site states
> that PCAD will only work on NT if you have a serial key, with the help
> of a third party driver. Of course, my hardware key is parallel.
>
> Do any of you use PCAD on NT, and know a way around this problem?
> As a last resort, I will probably have to set up the machine to dual
> boot NT and DOS. (Assuming that will even work.)
>
> Thanks in advance for any assistance.
>
> Ron James
> UT Electronic Controls
> Huntington, IN
>
>################################################################
>DesignerCouncil E-Mail Forum provided as a free service by IPC using
>LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in the body:
>To subscribe: SUBSCRIBE DesignerCouncil <your full name>
>To unsubscribe: SIGNOFF DesignerCouncil
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
>for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
>847-509-9700 ext.312
>################################################################
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|