TECHNET Archives

November 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Pedersen, Anders" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 5 Nov 1998 10:45:01 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (35 lines)
We have recently seen a failure of an assembly in a humidity chamber.  There
were two things observed.  First, on an external layer, power traces (+25V) were
very close to ground traces (~20 mils), and an apparent electrical bridge caused
a short and a burned the area.   Secondly, other areas of the board appeared to
have white residue and broken down soldermask bridging between connector pins.
Some of these areas took up a number of pins (thumb print size).

I vaguely remember and issue where assemblies that were not thoroughly cleaned
could leave residuals (chlorides?) and that when subjected to a humid
environment could break down soldermask.  I also believe that humid chlorides
can crystallize and can be influenced by electrical potentials between pins -
causing shorts.  However, that's where my memory breaks down.

Can anybody provide some clarity on potential reasons for soldermask to
breakdown in a humidity chamber?

Thank you,

                Anders P. Pedersen                         * 407-729-2143 (ph)
        Harris Aerospace                                   * 407-729-2097 (fax)
        P.O. Box 94000, MS22-4842                  * [log in to unmask]
        Melbourne, FL 32902                        http://www.harris.com/

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2