TECHNET Archives

November 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"McMonagle, Michael R." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 3 Nov 1998 11:43:25 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (63 lines)
Kinnarney Rubber Company (609-468-1320) makes masking boots for
conformal coat and probably has something for hole plugs too....

Mike McMonagle
PCA Process Engineering Supervisor
K*Tec Electronics
1111 Gillingham Lane
Sugar Land, TX  77478
(281) 243-5639 Phone
(281) 243-5539 Fax
[log in to unmask]

> -----Original Message-----
> From: <Jason M. Smith> [SMTP:[log in to unmask]]
> Sent: Tuesday, November 03, 1998 10:50 AM
> To:   [log in to unmask]
> Subject:      Re: [TN] hole plug source
>
> Does anyone have a source for wave soldering tooling hole plugs?  The
> company we
> were sourcing from went out of business and we've been reluctant to
> find another
> supplier.  The plugs are a soft rubbery grommet like materials easily
> applied
> and removed to protect solder from going up through the holes and the
> air knife
> to blow unnecessarily through holes that are approx. 1/4" in diameter,
> but the
> material is to flexible enough to accomodate sizes in the same
> neighborhood.  I
> would appreciate your assistance.
>
> Jason Smith
> process materials engineer
> Lexmark Electronics
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2