TECHNET Archives

November 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: hole plug source
From:
"<Jason M. Smith>" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 3 Nov 1998 11:50:26 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines) 
Does anyone have a source for wave soldering tooling hole plugs?  The company we
were sourcing from went out of business and we've been reluctant to find another
supplier.  The plugs are a soft rubbery grommet like materials easily applied
and removed to protect solder from going up through the holes and the air knife
to blow unnecessarily through holes that are approx. 1/4" in diameter, but the
material is to flexible enough to accomodate sizes in the same neighborhood.  I
would appreciate your assistance.

Jason Smith
process materials engineer
Lexmark Electronics

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2