Fab Gurus,
We are designing board with a 40 mil BGAs first time and the fab will be
having 10 mil plated finished holes on it. I opened up an old existing
drawing of different non-BGA board and now I have couple of questions after
reading my fab drawing notes.

(1) Fab note: All holes to be within .006" true position on the diameter
with respect to original data.
Question: What is true position and why .006"? How to decide this number?

(2) Registration: Front to back to be within  +/-.005". Can anyone explain
what is registration and why .005"? Who can decide this #, is it fab house's
processing capability?

re,
Ken Patel
______________________________________________________
Ken Patel                       Phone:  (408) 490-6804
1708 McCarthy Blvd.             Fax:    (408) 490-6859
Milpitas, CA 95035              Beeper: (888) 769-1808

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################