TECHNET Archives

November 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Conformal Coating Needed??
From:
[log in to unmask]
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 17 Nov 1998 13:22:38 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (27 lines) 
I am looking for a Conformal Coating that is to go into an Automotive
application.
This is going on a flex circuit antenna (a patch array)  that will be
flexed a couple of times with a to install (large bend radius) so it needs
to be flexible.
It also needs to be somewhat chemical resistant (will be cleaned with
alcohol and live in an harsh enviroment ).
Operating temp from -45 deg C to 85 deg. C
DK needs to be under 3.0
I would also like it to be Screenable if possible.

If you can help please email or call me  [log in to unmask]

Phone 417-781-3200 ext 215

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2