TECHNET Archives

November 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Kenny Bloomquist <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 17 Nov 1998 07:57:38 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (38 lines)
Greg,

We use counter sunk holes for both screws and rivets with no problems. We
do not plate them, just bare laminate. Don't know of any IPC references
though.

Hope that helps a little.


Ken Bloomquist
Sr. Principal Process Engineer
PRIMEX Aerospace Company
P.O. Box 97009
Redmond, WA 98073-9709
www.primextech.com

Ph:   425-885-5000
FAX: 425-882-5786
[log in to unmask]

Northcon/98, Show Director
<www.northcon.org>

Electronics Manufacturers Association (EMA), Secretary
<www.ema-wa.org>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2