TECHNET Archives

November 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: fixing exposed copper/traces
From:
Bruce Adams <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 11 Nov 1998 04:41:13 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (55 lines) 
Hi Bryan,

Contact East sells a touchup pen called "Circuit Works". It is just the
thing you need for your application.

Good Luck

 Bruce Adams
 Datametrics Corp.
 Orlando, FL     [log in to unmask]
> -----Original Message-----
> From: Bryan Bloom [SMTP:[log in to unmask]]
> Sent: Tuesday, November 10, 1998 11:54 AM
> To:   [log in to unmask]
> Subject:      [TN] fixing exposed copper/traces
>
> With a through-hole board, somtimes the masking is nicked, exposing
> the
> copper (bare metal).
>
> What methods - pens, etc. - do others use to touch up the mask?  Any
> recommendations on specific products (manufacturers) and/or methods?
>
> Thanks for your help.
>
> Bryan Bloom
> G&M Assembly
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2