Sender: |
|
Subject: |
|
From: |
|
Date: |
Tue, 10 Nov 1998 15:25:00 PST |
Reply-To: |
|
Parts/Attachments: |
|
|
To all technetters:
Our design department is contemplating use of a CQ132 Ceramic Quad Flatpack.
This is a 132 lead device with 25 mil pitch leads. The part will come
supplied on a lead frame where we will program the part, then press the part
out, screen print and place, and then reflow the part.
A number of questions:
1) I have been dealing with Fancort Industries to design a die for stamping
out the Gull wing form. Are there any other companies who specialize in
forming equipment for this kind of part ?
2) Is there a correct pad geometry for this part ?? IPC spec ?? Reference ??
3) Anybody out there familiar with the proecess that I've just described ?
Hopefully theres someone out there in a "been there, done that" mode that
can give me some pointers.
4) Among the users of CQ132 QFP's, have you used your parts in a military
environment capable of meeting vibration and thermal requirements ??
5) Anybody with forming equipment out there who can tell me how easy or
difficult it was to generate a die design ?? Any advice ??
Thanks to any and all who respond. I am really up against the wall on this
one.
Bill Kasprzak
Moog Inc.
[log in to unmask]
716-652-2000 x2507
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|