Marc,
       For SMD dip packages, we are using our FUJI CP-642 for mounting SMD
     SOIC and Large-SOIC packages very effectively using a 3.7mm nozzle,
     24mm FUJI feeders. We run full speed for 8-pin, 90% speed for 14 &
     16-pin SOIC, and 85% speed for Large-16-pin-SOIC. Works GREAT! This
     also gives us more latitude for line balancing with the flexible
     placer. Good Luck.
     United Technology Electronic Controls
     Jeff L. Hempton, Sr. SMD Engineer
     E-mail: [log in to unmask]



______________________________ Forward Header __________________________________
Subject: [TN] mounting SOIC using Chipshooter
Author:  "Marc O. Bituagan" <[log in to unmask]> at Internet
Date:    11/3/98 1:48 PM


To anyone who can help,
        We are contemplating on mounting a 14 pin DIP(4.3mm x 5.1mm, 0.35
mm pitch) using our FUJI CP6 chipshooter  but have no experience
doing so. We have successfully mounted 8 pin IC's in the past but
not quite sure what to expect this time out. Anyone out there with
experience or knowledge with the set-up, your two-cents on the matter
is highly appreciated.

        Thanks.

Marc O. Bituagan
Industrial Engineer
Electronic Assemblies, Inc.
Manila, Philippines

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for
additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700
ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################