I have some questions on the consistency of readings that people are
getting using devices like the Optimizer and Wave Rider.

1.  What sort of variations are you seeing from run to run and day to day
in parallelism, immersion depth and conveyor speed?

2.  What variation do you allow in these areas?

3.  What wave solder machine do you use with your device?

We have a Technical Devices machine and using an Optimizer we see some
pretty good swings day to day, particularly in the parallelism.

Ken Bloomquist
Sr. Principal Process Engineer
PRIMEX Aerospace Company
P.O. Box 97009
Redmond, WA 98073-9709

Ph:   425-885-5000
FAX: 425-882-5786

Northcon/98, Show Director
<www.northcon.com>

Electronics Manufacturers Association (EMA), Secretary
<www.ema-wa.org>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################