Roland-
Please see:
1) "A Flexible Production Laser System for Blind Via Drilling," by Anton
Kitai Sr., and Jim Morrison of Lumonics, pg.10 of CircuiTree Magazine,
Vol.11, no.9, September 1998.
---A combination Nd YLF and TEA CO2 laser was used in this study.
2) "Limits of Copper Plating in High Aspect Ratio Microvias," by Steve
Castaldi [MacDermid], Dennis Fritz [MacDermid], and Ron Schaeffer
[PhotoMachining, NH USA], pg.66 of CircuiTree Magazine, vol.11, no.9,
September 1998.
---Includes many color cross-section photos. Vias in study made with
both ESI's UV YAG laser, and a Lumonics (TEA) CO2 laser.
3) "Integrating High Density Interconnect Microvia Technology into the
Multilayer Board Mainstream," by Jim Paulus and Frank Polakovic, pg.68
of CircuiTree Magazine, vol.11, no.10, October 1998.
---UV YAG used in this study. Particular attention focused on desmear
methodologies. Also describes a three company collaborative study,
related to this article, which is now in progress.
-Michael Alderete
You wrote...
----------------------------------------------------------------------
Date: Sat, 26 Sep 1998 11:03:11 +0200
From: Roland Jaquet <[log in to unmask]>
Subject: laser drilling / ablation
Message en plusieurs parties et au format MIME.
------=_NextPart_000_001F_01BDE93D.406241E0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Dear Technetters,
We are doing a search for pertinent information on the following as per
to
justify the acquisition of a laser ablation machine, to choose the right
one
etc.. It certainly would help to get equipment manufacturers technical
articles and studies as well as experienced users.
The market in this case is QTA only, for a shop of about 80 employees
enjoying a Europe wide recognition.
Laser drilling pros and cons
CO2 pros & cons
YAG pros & cons
CO2 + YAG pro & cons
Mechanical drilling Z-axis controlled limitations against Laser drilling
Justification of laser drilling against mechanical drilling Z-axis
controlled
Thank you for your help.
Best Regards
Roland
Roland Jaquet
Consultant / Technical Advisor
T +41-22-880-0405
F +41-22-880-0409
GSM +41-79-203-3723
[log in to unmask]
Http://www.Photochemie.ch
------=_NextPart_000_001F_01BDE93D.406241E0
Content-Type: text/x-vcard;
name="Roland Henri Jaquet.vcf"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="Roland Henri Jaquet.vcf"
BEGIN:VCARD
VERSION:2.1
N:Jaquet;Roland;Henri
FN:Roland Henri Jaquet
ORG:Roland H. Jaquet
TITLE:Consultant / Technical Advisor
TEL;WORK;VOICE:+41-22-880-0405
TEL;HOME;VOICE:+41-22-880-0405
TEL;CELL;VOICE:+41-79-203-3723
TEL;PAGER;VOICE:+41-79-203-3723
TEL;WORK;FAX:+41-22-880-0409
TEL;HOME;FAX:+41-22-880-0409
ADR;WORK:;;21 Grand-Voiret;Plan-Les-Ouates;GENEVA;1228;SWITZERLAND
LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:21 =
Grand-Voiret=3D0D=3D0APlan-Les-Ouates, GENEVA 1228=3D0D=3D0ASWITZERLAND
ADR;HOME:;;21 Grand-Voiret;Plan-Les-Ouates;GENEVA;1228;SWITZERLAND
LABEL;HOME;ENCODING=3DQUOTED-PRINTABLE:21 =
Grand-Voiret=3D0D=3D0APlan-Les-Ouates, GENEVA 1228=3D0D=3D0ASWITZERLAND
URL:
URL:http://www.Photochemie.ch
EMAIL;PREF;INTERNET:[log in to unmask]
REV:19980926T090311Z
END:VCARD
------=_NextPart_000_001F_01BDE93D.406241E0--
------------------------------
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
