TECHNET Archives

October 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
conformal coat machines
From:
Ed Holton <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 29 Oct 1998 10:38:02 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines) 
We are looking for a small dip conformal coat machine with curing/drying
capability.  By small, i mean something reasonable size, not one of those
10'x10'x10' monsters I use to use.  Spraying is not an option at this time
because both sides of the board need to be coated

Any suggestions,

Thanks

Ed Holton
Hella Electronics

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2