Hello,

Rounded to the nearest tenth of thousandth, 1 oz. = .0014" per square foot
(think of an area one (1) square foot in size and one (1) oz. of copper is
poured into this one (1) square foot area - that equates to .0014" in copper
thickness over the one (1) square foot area  - Half (.5) oz. is half this
thickness (.0007").

Sincerely,


Rick A. Scovel
Customer Support
Dynamic Vision


Scott Holthausen wrote:
>
> Hello Technetter's
>
> Roughly, how thick is 1oz. copper? How about .5oz. copper?  I can't seem to
> remember how the equation goes.
>
> Thanks,
> Scott Holthausen
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
> ################################################################