TECHNET Archives

October 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"McMonagle, Michael R." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 12 Oct 1998 07:35:13 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (67 lines)
I would recommend going with the two piece design, unless your
inspectors have X-Ray vision (hehehe).

Mike McMonagle
PCA Process Engineering Supervisor
K*Tec Electronics
1111 Gillingham Lane
Sugar Land, TX  77478
(281) 243-5639 Phone
(281) 243-5539 Fax
[log in to unmask]

> -----Original Message-----
> From: Lustig, Steven K.. [SMTP:[log in to unmask]]
> Sent: Monday, October 12, 1998 6:41 AM
> To:   [log in to unmask]
> Subject:      [TN] EMI Shields
>
> Good morning!
>
> Does anyone have experience with EMI/RF shields ("cans") that have SMT
> legs which you put onto pads on the board and then reflow?  Can you
> reflow this while reflowing the parts underneath the shield, or will
> those parts see insufficient heat to reflow their solder?  Do you
> recommend a one-piece shield or a two piece one - where there is a
> fence-like perimeter that solders onto the board with those SMT legs
> and
> then a lid which snaps onto the fence?
>
> Thanks in advance for the help.
>
> -Steve
>
> Steven K. Lustig
> Process Engineer
> EMS Technologies, Inc.
> Norcross, GA
> (770) 263-9200 x4714
> [log in to unmask]
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2