TECHNET Archives

October 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Stephen R. Gregory" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 8 Oct 1998 10:14:43 EDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (29 lines)
In a message dated 10/8/98 6:00:43 AM Pacific Daylight Time,
[log in to unmask] writes:

<< Rod/Bill
 I concur with those numbers as a worst case.  Actually 20% max (5 - 10%
 nom) can be pretty easily achieved with the correct thermal profiles and
 the correct paste selection.  Boiling point of the paste volatiles plays
 a large part.
 Jim Kittel >>

Hi Jim!

     Can I ask what's desireable? Lower boiling point temperatures? Also, does
mesh size and/or percentage of metals in your paste play any role? Thanks!

-Steve Gregory-

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2