Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 2 Oct 1998 10:31:13 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I am very curious to know:
1. Is it true that solder will definitely flow through a PTH via?
2. What if the via hole is small enough to prevent this capillary effect? Does that means PTH via is still
OK?
3. How small a via hole will be for (2)?
Kelly M. Schriver wrote:
> Hi Scott -
>
> The via in pad is a problem UNLESS it's a microvia which only goes a layer or
> two deep in the board. Vias which go all the way thru the board will steal
> solder from the connection you're trying to make on one side, then turn that
> same solder into a nice spherical bead on the opposite side.
>
> The inspectors and touch up people, in turn, have lifetime job security.
>
> Regards - Kelly
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|