Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 9 Oct 1998 12:33:31 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have been loosely using the 'rule' of 30 grams / sq. inch. (yes,
mixed units)
It seems to work.
However, if the pads are too large, the component may swim around on
them.
Joe Hurst
> -----Original Message-----
> From: [log in to unmask] [SMTP:[log in to unmask]]
> Sent: Friday, October 09, 1998 11:42 AM
> To: [log in to unmask]
> Subject: [TN] question
>
> problem: smd components floating off the pads during reflow (i.e.
> mailbox
> aluminium electrolytic capacitor)(d-packs)
>
> question: is there any information (or guidelines) that discuss the
> relationship between component weight and contact surface area with the
> board.
>
> we have mailbox packages that float around during reflow because the
> surface tension of the molten paste is not great enough to prohibit the
> component from moving during reflow. the problem is also related to
> "smoothness" of the material handling, i.e. no abrupt inertial changes.
>
> we can kinda guess that larger lead/land and pad sizes would keep the
> component in it's appropriate location, but it would be nice to have some
> "rule of thumb ratio" that we can add to our design guidelines.
>
> any help would be appreciated.
>
> M.R. McQueeney
> Advance Technology Engineering
> Chrysler Huntsville Electronics
> (256) 464-2629
> [log in to unmask]
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|