what is actually happening. I had a problem that is similar I think. I had
to make sure the clearance settings wer set properly on a per net basis.

Scott

-----Original Message-----
From: Scott Buscomb [mailto:[log in to unmask]]
Sent: Wednesday, October 14, 1998 10:25 AM
To: [log in to unmask]
Subject: Re: [DC] RS274X format problem


I have had problems reading in PADS PowerPCB generated positive drawn planes
into CAM350. I have not been
able to resolve the problem except to use RS274-D format on the files that
have the problem. Try messing
with the arc interpolation setting (set to quadrant) if possible. This
worked with a VeriBest problem I had
in the past.

Scott
--
Scott Buscomb, Senior Designer
[log in to unmask]
Techsonic Industries Inc.
Humminbird/Zercom Marine Electronics
1111 Alderman Dr. Ste. 250
Alpharetta, GA 30005
770 475-3020 ext.1032

http://www.humminbird.com


Dennis Ward wrote:

> Hello,
>
> The fab house I'm using has encountered a problem importing my RS274X
artwork.
> I believe their software is having a hard time compositing(?) the power
plane layers.
> I'm still unsure what exactly is happening - I plan on visiting them
tomorrow and see
> first hand.
>
> My software (output) - Allegro designer - version 13
> Theirs (Input) - Tibor Davos - version unknown.
>
> Has anyone else experienced any difficulties with RS274X formatted power
and ground planes
> generated from Allegro??
>
> Any (I do mean ANY) help would be appreciated.
>
> Thanks
> Dennis Ward
> Net to Net Technologies
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
> To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe:   SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
> ################################################################

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################